
Avantajlar
Wide range of applications: 1 staple to join a thickness 6 to 12 mm (7/32 ‘’ – 15/32 ‘’)
Continuous length
Pre-assembled crampons
Good compression
Very resistant
Eşsiz teknolojisi ile pazardaki en özel sıyırıcı. ISC , SUPER SCREW VE FİXNGO ile sorunsuz tam uyumlu çalışma özelliği. Eşsiz bir yapıya sahip olan sıyırıcımız bandınız ne durumda olursa olsun bandınıza adapte olur tam anlamıyla sıyırıcı görevini uzun süre görür. Tıkanma önleyici yapısıyla ve ortadan pivot sistemli çift yaylı yapısıyla bandınızdaki her şekillenmeye karşı tam uyum.
Wide range of applications: 1 staple to join a thickness 6 to 12 mm (7/32 ‘’ – 15/32 ‘’)
Continuous length
Pre-assembled crampons
Good compression
Very resistant
Carrier material | Polyurethane, optional - low-wear = standard - flame-resistant and antistatic - FDA - heat resistant material on request |
Shore | Shore A 70 ± 5 |
Working temperature | -30° to + 80° C |
Lamella Material | > 360 HB or stainless steel |
System length | 2 m right and left side |
Suitable for trough angle (X°)
from 0° to 45°
Belt overhang: > 102 mm
X° | H | G |
---|---|---|
0° | 117 | 102 |
10° | 119 | 105 |
15° | 121 | 108 |
20° | 122 | 110 |
25° | 125 | 115 |
30° | 128 | 120 |
35° | 133 | 125 |
40° | 141 | 133 |
45° | 148 | 140 |
Carrier material | Polyurethane, optional - low-wear = standard - flame-resistant and antistatic - FDA - heat resistant material on request |
Shore | Shore A 70 ± 5 |
Working temperature | -30° to + 80° C |
Lamella Material | > 360 HB or stainless steel |
System length | 2 m right and left side |
Suitable for trough angle (X°)
from 0° to 45°
Belt overhang: > 102 mm
X° | H | G |
---|---|---|
0° | 112 | 75 |
10° | 114 | 78 |
15° | 117 | 80 |
20° | 118 | 82 |
25° | 119 | 86 |
30° | 120 | 90 |
35° | 124 | 94 |
40° | 128 | 100 |
45° | 129 | 102 |
Carrier material | Polyurethane, optional - low-wear = standard - flame-resistant and antistatic - FDA - heat resistant material on request |
Shore | Shore A 70 ± 5 |
Working temperature | -30° to + 80° C |
Lamella Material | stainless steel |
System length | 2 m right and left side |
Suitable for trough angle (X°)
from 0° to 45°
Belt overhang: > 102 mm
X° | H | G |
---|---|---|
0° | 97 | 60 |
10° | 98 | 62 |
15° | 99 | 66 |
20° | 101 | 69 |
25° | 103 | 73 |
30° | 106 | 78 |
35° | 112 | 82 |
40° | 117 | 91 |
45° | 123 | 95 |