The revolutionary belt centerer An ingenious system to center your belts. The STAR is the first self-centerer in the world to have used this principle and to propose several models of which the standard are entirely adjustable STAR tracker©. Compatible with SUPER-SCREW®, ISC® and FIX'N GO®.
100 % compatible with SUPER-SCREW® – ISC® – FIX’N GO®
Works flat or troughed
Equipped with an anti-clogging skirt
Equipped with retaining locks for idlers
Large variety of idler quality
Strong structure, reinforced version available
Works head down on chevron belts
Symmetrical : centering belts with double direction of flow
Economical by replacing only the idlers within a few minutes
| Carrier material | Polyurethane, optional - low-wear = standard - flame-resistant and antistatic - FDA - heat resistant material on request |
| Shore | Shore A 70 ± 5 |
| Working temperature | -30° to + 80° C |
| Lamella Material | > 360 HB or stainless steel |
| System length | 2 m right and left side |
Suitable for trough angle (X°)
from 0° to 45°
Belt overhang: > 102 mm
| X° | H | G |
|---|---|---|
| 0° | 117 | 102 |
| 10° | 119 | 105 |
| 15° | 121 | 108 |
| 20° | 122 | 110 |
| 25° | 125 | 115 |
| 30° | 128 | 120 |
| 35° | 133 | 125 |
| 40° | 141 | 133 |
| 45° | 148 | 140 |
| Carrier material | Polyurethane, optional - low-wear = standard - flame-resistant and antistatic - FDA - heat resistant material on request |
| Shore | Shore A 70 ± 5 |
| Working temperature | -30° to + 80° C |
| Lamella Material | > 360 HB or stainless steel |
| System length | 2 m right and left side |
Suitable for trough angle (X°)
from 0° to 45°
Belt overhang: > 102 mm
| X° | H | G |
|---|---|---|
| 0° | 112 | 75 |
| 10° | 114 | 78 |
| 15° | 117 | 80 |
| 20° | 118 | 82 |
| 25° | 119 | 86 |
| 30° | 120 | 90 |
| 35° | 124 | 94 |
| 40° | 128 | 100 |
| 45° | 129 | 102 |
| Carrier material | Polyurethane, optional - low-wear = standard - flame-resistant and antistatic - FDA - heat resistant material on request |
| Shore | Shore A 70 ± 5 |
| Working temperature | -30° to + 80° C |
| Lamella Material | stainless steel |
| System length | 2 m right and left side |
Suitable for trough angle (X°)
from 0° to 45°
Belt overhang: > 102 mm
| X° | H | G |
|---|---|---|
| 0° | 97 | 60 |
| 10° | 98 | 62 |
| 15° | 99 | 66 |
| 20° | 101 | 69 |
| 25° | 103 | 73 |
| 30° | 106 | 78 |
| 35° | 112 | 82 |
| 40° | 117 | 91 |
| 45° | 123 | 95 |
