Airform – Silgilik.com

Banttek

PRIME TRACKER

The conveyor belt is one of the most expensive components of belt conveyors. Poor belt guidance leads to excessive wear and inevitably to early replacement, resulting in high replacement costs and short service lives.

Avantajlar

    • The PrimeTracker immediately reacts already in case of the slightest off-centre running of the belt.

    • It guides the belt with very low friction and small forces → long service life.

    • It does not “wait“ for the guide roller to tilt vertically (as with other systems), but reacts before.

    • It also functions perfectly in reversing mode.

    • Easy installation

    • Maintenance-free

    • Special pivot bush, very durable

    • It guarantees optimum position at the transfer points. In combination with the AirScrape spillage is no longer possible.

AirScrape ® - LARGE

Technical Data

Carrier materialPolyurethane, optional
- low-wear = standard
- flame-resistant and antistatic
- FDA
- heat resistant material on request
ShoreShore A 70 ± 5
Working temperature-30° to + 80° C
Lamella Material> 360 HB or stainless steel
System length2 m right and left side

Suitable for trough angle (X°)
from 0° to 45°
Belt overhang: > 102 mm

X°HG
0°117102
10°119105
15°121108
20°122110
25°125115
30°128120
35°133125
40°141133
45°148140

AirScrape ® - LARGE

Technical Data

Carrier materialPolyurethane, optional
- low-wear = standard
- flame-resistant and antistatic
- FDA
- heat resistant material on request
ShoreShore A 70 ± 5
Working temperature-30° to + 80° C
Lamella Material> 360 HB or stainless steel
System length2 m right and left side

Suitable for trough angle (X°)
from 0° to 45°
Belt overhang: > 102 mm

X°HG
0°11275
10°11478
15°11780
20°11882
25°11986
30°12090
35°12494
40°128100
45°129102

AirScrape ® - LARGE

Technical Data

Carrier materialPolyurethane, optional
- low-wear = standard
- flame-resistant and antistatic
- FDA
- heat resistant material on request
ShoreShore A 70 ± 5
Working temperature-30° to + 80° C
Lamella Materialstainless steel
System length2 m right and left side

Suitable for trough angle (X°)
from 0° to 45°
Belt overhang: > 102 mm

X°HG
0°9760
10°9862
15°9966
20°10169
25°10373
30°10678
35°11282
40°11791
45°12395

AirScrape® Ürün Broşürü

İncele

AirScrape® Ürün Broşürü

İncele

AirScrape® Ürün Broşürü

İncele